Fiberglass vs Steel Entry Doors: Which Should You Buy?
Buy steel if you want a strong door at a price ProVia calls very affordable compared to wood, and you can live with touching up a dent. Buy fiberglass if you want a woodgrain look you can stain and a skin that shrugs off dings. On energy, the two are close. The U.S. Department of Energy says "The R-values of most steel and fiberglass-clad entry doors range from R-5 to R-6, excluding a window," and ProVia's U-factors, tested to NFRC specifications, put its Signet fiberglass door as low as 0.16 and its Legacy steel door as low as 0.17.
That 0.17 matters because it is the ENERGY STAR Version 7.0 limit for a door with no glass. Add a glass panel and the door moves into a different ENERGY STAR category with its own limits. This guide compares ProVia steel and fiberglass doors on gauge, energy ratings, dents, finishes and warranties, so you can choose before you order.

What Is the Difference Between Steel and Fiberglass Entry Doors?
Both are built around an insulating foam core. The difference is the skin.
Steel: ProVia's Legacy door is 20-gauge galvannealed steel over a polyurethane foam core, and ProVia's non-residential door brochure lists 20-gauge faces at 0.032 inch. ProVia says Legacy doors "have 49% more galvannealed steel than 24-gauge doors."
Fiberglass: ProVia's Signet line is "Durable fiberglass that looks like wood," with a "2 5/8" finger-jointed 3-ply hardwood hinge stile." Its Ascent line has a "thicker, high-durability fiberglass skin" than standard models, per ProVia.
DOE describes one common type of exterior door the same way: "a steel skin with a polyurethane foam insulation core," usually with "a magnetic strip (similar to a refrigerator door magnetic seal) as weatherstripping."
Which Is More Energy Efficient: Steel or Fiberglass?
By ProVia's numbers, fiberglass edges out steel by a hair.
ProVia line | Skin | Entry system U-factor (as low as) | Finish options | Finish warranty |
Signet | Fiberglass | 0.16 | Cherry, Mahogany, Oak, Knotty Alder, Fir or Smooth; 20 stains, 7 glazes, 33 paint colors | 15 years |
Ascent | Fiberglass, thicker skin | Not listed in the brochure | White Oak grain or smooth; 7 stains, 33 paint colors | 10 years |
Legacy | 20-gauge galvannealed steel | 0.17 | Smooth or oak woodgrain; 7 stains, 33 paint colors | 10 years |
Sources: ProVia non-residential and multi-family door brochure (12/25), U-factors "Tested to NFRC specifications for a 6 panel door with wood frame"; ProVia entry door pages, checked October 2026.
Both figures are "as low as" numbers for a six-panel door, so the door you order may rate differently. ProVia says "All of ProVia's doors that do not have glass are ENERGY STAR certified," and DOE adds that "insulated steel and fiberglass doors are more energy-efficient" than wood. CGR's guide to window U-factor explains how to read the number.
How Does Glass in the Door Change the Energy Rating?
ENERGY STAR Version 7.0, effective October 23, 2023, sorts doors by how much glass they have:
Opaque (no glass): U-factor of 0.17 or lower.
Half-lite or less (up to 900 square inches of glass in the door): U-factor of 0.23 or lower and SHGC of 0.23 or lower.
More than a half-lite: in the Northern and North-Central zones, U-factor of 0.26 or lower and SHGC of 0.40 or lower.
Air leakage for swinging doors: 0.5 cfm per square foot or less.
So a door with more glass can qualify at a higher U-factor than a solid door, and a higher U-factor means more heat moves through it. If you want light and efficiency, a half-lite or decorative glass insert is the middle ground. ProVia says "All Signet doors without glass are ENERGY STAR certified and most models with glass are as well."
One tip from DOE: a glass storm door "could trap heat against an entry door and cause damage" if the door gets "more than a few hours of direct sun each day," and "adding a storm door to a newer, insulated door is not generally worth the expense."
Do Steel Entry Doors Dent or Rust?
They can. ProVia, which sells both, says steel dents can be fixed: "Dents and dings can be pulled and puttied with an auto-body repair kit." It also says that "if scratched through the galvanization, these doors can rust if not properly primed and painted."
Fiberglass is the low-maintenance side. ProVia says "Fiberglass doors offer the lowest maintenance, resist denting and scratching," and "can be cleaned with mild soap and water." For a door that takes hits from strollers, bikes or a dog, fiberglass is the easier keeper.
Steel's selling points are strength and cost. ProVia calls Legacy "the strongest, most durable door on the market" and says "Steel doors are very affordable compared to wood doors." Its steel doors also get "a rigid composite lock block" at the lock and deadbolt.
Can a Fiberglass Door Look Like Real Wood?
Yes. Signet comes in Cherry, Mahogany, Oak, Knotty Alder and Fir grains plus a smooth skin, with 20 stains and 7 glazes. ProVia says fiberglass "can be comparable in cost to wood doors or can be significantly higher."
Steel can carry a woodgrain too. Legacy is "Available in smooth or woodgrain textures in multiple stain and paint finishes," but its grain is oak only. If you want a stained cherry or mahogany look, fiberglass is the pick. CGR's post on how ProVia entry doors add value and style shows more design options.
What Warranties Come With Steel and Fiberglass Doors?
ProVia's residential doors carry "a transferable Lifetime Limited Warranty that passes onto one subsequent owner of the home." Finish coverage differs by line: 15 years on Signet, 10 on Ascent, and 10 on Legacy steel against "flaking, checking, blistering, or peeling."
Shuster's, a millwork company in North Huntingdon, lists PlastPro fiberglass exterior doors with a limited lifetime warranty on textured doors and 25 years on smooth, against warping, cracking, shrinking, delaminating or splitting. Its glass is "warranted for 10 years, pro-rated," and Shuster's says its warranties are non-transferable.
Which Entry Door Should You Buy?
Strong door at a price ProVia calls very affordable compared to wood: ProVia Legacy steel.
Stained wood look without wood upkeep: ProVia Signet fiberglass.
Heavy traffic, kids or pets: fiberglass, for dent and scratch resistance.
Lots of glass: check the door's ENERGY STAR category and NFRC label, not just the slab material.
Quick turnaround on a replacement: ask about Shuster's lead times.
CGR's posts on why ProVia doors are a top choice for renovations and the benefits of upgrading doors and windows cover more of the upgrade.
FAQ
Is a fiberglass or steel front door better?
Fiberglass resists dents and takes a wood stain. ProVia calls its Legacy steel door its strongest and says steel doors are very affordable compared to wood doors. Their energy ratings are close: as low as 0.16 for Signet fiberglass and 0.17 for Legacy steel, per ProVia.
Which is more energy efficient, steel or fiberglass?
DOE puts most steel and fiberglass-clad doors at R-5 to R-6 without glass. ProVia's fiberglass Signet tests slightly better than its Legacy steel.
What does 20-gauge steel mean for a door?
A lower gauge is thicker steel. ProVia's 20-gauge faces are 0.032 inch thick, with 49% more galvannealed steel than a 24-gauge door.
Can you fix a dent in a steel door?
ProVia says dents and dings can be pulled and puttied with an auto-body repair kit. It also says a steel door scratched through the galvanization can rust if it is not properly primed and painted.
Does glass in a door affect ENERGY STAR rating?
Yes. ENERGY STAR sets a 0.17 U-factor limit for doors with no glass, 0.23 for a half-lite or less, and 0.26 for more glass in the Northern and North-Central zones.
Are ProVia door warranties transferable?
Yes. ProVia's Lifetime Limited Warranty passes to one subsequent owner of the home.
Order ProVia and Shuster's Doors at CGR Wholesale
CGR Wholesale Roofing & Siding Supply Center is "NOW ORDERING" ProVia exterior doors, with decorative glass options and a wide choice of colors and finishes. It also orders Shuster's interior and exterior doors, and CGR's Shuster's page says most doors have a 7 to 10 day turnaround. Bring your rough opening size and swing direction to the Rostraver showroom, open Monday through Friday 7:00 AM to 4:00 PM and Saturday 7:00 AM to 12:00 PM, or call to place an order.
Visit CGR Wholesale Roofing & Siding Supply Center or call 724-268-3671 today. Contact us for more information.






Comments